AT210 Specifications

The Atlantis AT210 – 
the water softener reinvented

WITH A TEN YEAR PARTS GUARANTEE

You’ve never seen a water softener as good as this before

The AT210 is an uncompromisingly modern appliance – the result of a complete re-appraisal of the conventional water softener.
The AT210 combines the best quality components, gives priority to ease of use and is an efficient, user friendly modern appliance.
Design advantages over the average softener include:

a slimline cabinet with improved vessel proportions;

state of the art electronics that are upgradable and reprogrammable, so that the AT210 stays at the leading edge of water softener technology.
Constantly updated
We don’t change for change’s sake, only to make the softener better. Sometimes the improvements are just small things, but over time they add up to make a big difference.

Specifications

Improvements made since the AT210 was first introduced include:
•    upgraded electronics that mean the softener uses less salt          than ever  
•    the drain pipe is now a 3⁄8“ hose that is 3 metres long. This makes it easy to run along the back of a cupboard, which could reduce the time and cost of installation.
Capable of producing more soft water from less salt than any other water softener

Height                                                620mm
Depth (with hoses)                             454mm
Width                                                  247mm
Power                              12V via transformer
Maximum Pressure                   5 Bar (70PSI)
Minimum Pressure                1.4 Bar (20 PSI)
Warranty                                 10 Years Parts

Programmed to regenerate only exhausted resin, an advanced micro chip has been developed to use the least amount of salt and water at the best time of day and night. This ensures that your flow of soft water is disrupted as little as possible and remains consistent whatever time of day or night.
No clock – for trouble free set up
Taking only seconds to set up when installed, the clock-free control system retains settings indefinitely, controlling the remaining capacity of the water softener – even after a power cut. This gives the AT210 the ability to maintain a supply of softened water that matches your individual requirements. Unlike most softeners, the AT210 is so simple to install and set up that commissioning is not necessary.
Meter control is standard
Unlike most water softeners on the market, the AT210 comes with meter control as standard. Meter control manages the regeneration of your softener in line with the amount of soft water used. The meter control ensures that only exhausted resin is regenerated. Meter control should not be confused with the less efficient time-controlled systems available which regenerate at a fixed time of day regardless of how much or how little soft water used.


You’ve never used a water softener as easy as this before
• capable of producing more soft water from less salt than any      other softener
• unique slimline design
• state of the art upgradable electronics
• quick and simple push button set-up
• distinctive styling
• ten years parts guarantee
• reliable control valve
• meter control as standard
• automatic partial regeneration – saves salt
• built in health check
• pulsing LED’s indicate the softener is functioning correctly.